W7500S2E-R1 is an industrial-grade serial-Port Ethernet module, supporting TCP Server, TCP client and UDP three kinds of operation mode, serial port baud rate of up to 1.152Mbps, and support computer configuration software, also it can be easily configured through Web pages by AT commands.
Module is based on iMCU W7500 which integrates CortexM0 with full hardware TCP/IP protocol stack Ethernet engine, and network communication is fast, stable and robust. The user just need to refer to the reference schematics and the user manual, can complete the hardware circuit design quickly, reduces the development difficulty and saves the development time.
10/100 Mbps Ethernet interface with auto-negotiation and RJ45 connector
Support TCP server, TCP client and UDP operating modes
Flexible serial interface data packaging condition settings
Smart Ethernet cable detection and keep alive features
As DHCP client to automatically acquire IP address
As DNS client to lookup domain name
Support NetBIOS allows user to identify module’s name
Support user password authorization for security
Support serial AT command configuration method
Built-in web server for browser and remote configuring
Provide user-friendly configuration tool program (WIZS2E ConfigTool)
W7500S2E-R1 provides three common parameter configurations for users to choose from:
WIZS2E ConfigTool for Windows software, users can install the software on the Windows operating system computer configuration;
Web browser configuration, facilitate users to configure locally or remotely through a Web browser;
AT command configuration, users can integrate W5500S2E-R1 into their own embedded products on the motherboard, through the AT command for parameter configuration, or directly through the serial tool to use the AT command configuration.
Users who need to integrate the W5500S2E-Z1 module on their motherboard can refer to the appearance mechanical dimensions provided by FIG. 1?1. The length, width and height of the product, the distance between the two parts of the needle and the position of the four mounting holes are specified in the figure. In addition, the pin header is spaced by 2.54mm standard pins.
Figure 1?1 W7500S2E-R1 module physical dimension diagram ? top view
Figure 1?2 W7500S2E-R1 module physical dimension diagram ? side view