chip

제목 : WIZ107SR Firmware

WIZ107SR Firmware

 

No

Upload Date

Change Note

Version

Download

9

2014-11-26

Bug fixed

 - More stable in S2E data communication to fix the problem that any byte in data drops in Baudrate 115200bps sometimes

 - More stable in DHCP function to fix the problem on the lease time calculation when user tries to renew DHCP


Function addition

 - The function to display PHY link status using HW_TRIG pin

   => In normal operation, HW_TRIG displays TCP connection status like before(the state in TCP connection established: low, the other states: high)

   => In No-PHY link(like Ethernet cable is disconnected) case, HW_TRIG pin generates High and low signal in turns every second. When returning to normal condition, HW_TRIG displays TCP connection status as usual


Function removal

 - The removal of H/W Factory reset pin for more stable operation, but S/W Factory reset still exists. User can do S/W Factory reset using configuration tool or AT command set.

 - The removal of displaying DHCP Debug message

 - The removal of IP port filtering function in S2E communication over UDP. It enables multiple-peer communication(In previous version 4.03, only peer-to-peer communication was allowed)


WIZ107SR(HW Ver. 1.3 / 1,4) Firmware

4.04

Click

8

2014-04-23

Bug fixed

- Fixed DNS error when using it with DHCP at the TCP Client Mode

- Fixed DHCP parser error when processing DHCP option field 0.

- Fixed the error that "Ethernet to UART" function operates when the remote IP information is not correct at the UDP mode


WIZ107SR(HW Ver. 1.3 / 1,4) Firmware

4.03

Click

7

2013-11-07

Bug fixed.

- PHY Initialization Check routine was revised

- Problem about handling serial command mode was fixed

  => WIZ107SR jumps to serial command mode when it

        received data having serial command triggering character

        set from its serial was fixed.


WIZ107SR(HW Ver. 1.3) Firmware

3.14

Click

6

2013-06-10

Bug fixed.

WIZ107SR can be used the serial command mode without connecting LAN cable.


WIZ107SR(HW Ver. 1.3) Firmware

3.11

Click

5

2013-02-22

Problem fixed.

WIZ107SR sends DHCP Request Packet after DHCP lease time.


WIZ107SR(HW Ver. 1.3) Firmware

3.10

Click

4

2013-02-08

Modified serial command mechanism in order to use stable operation.

Added function for sending DHCP Request Packet when reconnect LAN cable.


WIZ107SR(HW Ver. 1.3) Firmware

3.07

Click

3

2012-11-15

Release


WIZ107SR(HW Ver. 1.3) Firmware

3.04

Click

2

2013-02-22

Problem fixed.

WIZ107SR sends DHCP Request Packet after DHCP lease time.


WIZ107SR(Old HW Ver. 1.1) Firmware

2.20

Click

1

2013-02-08

 Modified serial command mechanism in order to use stable operation.

Added function for sending DHCP Request Packet when reconnect LAN cable.


WIZ107SR(Old HW Ver. 1.1) Firmware

2.17

Click